Stereo Integrated Amplifier (1980-83)
The main amplifier in the Kenwood KA-9X / 9XG consists of a 3-stage differential class A voltage amplifier and a 3 stage Darlington class B SEPP.
Power output: 120 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.008%
Damping factor: 1000
Input sensitivity: 0.2mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MC), 87dB (MM), 107dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 440 x 109 x 340mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Dec 23rd, 2014 by fast400
This was a serious unconspicuous powerhouse back in the 80's. Recently kicked mine on...it's 120w push loud, but not quite as sweet as my 45w Marantz. I'm thinking it could be old caps. I wasn't as big of an audiophile in the 80's, but can recall it sounding sweeter back then.