Audio Video Surround Receiver (1997)
Tuning range: FM, MW
Power output: 150 watts per channel into 6Ω (stereo)
Surround output: 150W (front), 150W (center), 150W (rear)
Frequency response: 5Hz to 85kHz
Total harmonic distortion: 0.003%
Input sensitivity: 2.5mV (MM), 200mV (line)
Signal to noise ratio: 77dB (MM), 97dB (line)
Output: 200mV (line), 1V (Pre out)
Speaker load impedance: 6Ω to 16Ω
Digital inputs: coaxial, optical
Video Connections: composite, SVHS
Dimensions: 440 x 162 x 392mm
Accessories: remote control
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Feb 12th, 2015 by fastandcoolclub
I have been using this as an amp consistently for 17 years. Currently, is serves as a 20ft x 27ft dance floor amp with 2 sets of 4 ohm speakers going through a speaker selector.
This thing was built to last and it has. This aids in the fact Ohm mismatching damages your amp claims are not entirely true. The amp is rated 6-16 where 6 is not the true nominal but a suggested range.