AM/FM Stereo Receiver
Tuning range: FM, MW
Power output: 26 watts per channel into 8Ω (stereo)
Frequency response: 25Hz to 35kHz
Total harmonic distortion: 0.8%
Damping factor: 45
Input sensitivity: 4.5mV (mic), 3mV (MM), 120mV (line)
Signal to noise ratio: 60dB (mic), 60dB (MM), 70dB (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 32 x transistors, 30 x diodes, 1 x zener diode
Dimensions: 446 x 120 x 384mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Apr 16th, 2013 by marantz123
Hi I have restored a Trio (Kenwood) KR2200 and it is a lovely machine, build quality is similar to Marantz models of that era with Alps pots and tuning Capacitor, Elna electrolytics throughout that are still performing well, Noble selector and rotary power switch and features mic mixing input and 4ch input(quad). 4 power transistors. lovely low end. There good units. thanks.