hifi engine

Manual Library / Kenwood

Kenwood KR-5200

AM/FM stereo receiver (1972-74)

add a review add a review

Kenwood KR-5200


Tuning range: FM, MW

Power output: 30 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 40kHz

Total harmonic distortion: 0.5%

Damping factor: 50

Input sensitivity: 3mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 55dB (mic), 65dB (MM), 75dB (DIN), 75dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 1 x IC, 2 x FET, 51 x transistors, 48 x diodes

Dimensions: 17-1/8 x 5-3/4 x 14 inches

Weight: 24.6lbs


instruction/owners manual   English -

schematic   English - Biro

service manual   English - 69sixpackbee

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Edelbrok's picture

re: KR-5200

I was surprised with this japanese engineering of sound. Good powerful sound )))

This website is not affiliated with or sponsored by Kenwood. To purchase KR-5200 spares or accessories, please contact the company via their website or visit an authorised retailer.