hifi engine

Manual Library / Kenwood

Kenwood TK-140X

Solid-State AM/FM Stereo Receiver

add a review add a review

Kenwood TK-140X


Tuning range: FM, MW

Power output: 53 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.5%

Damping factor: 28

Input sensitivity: 2mV (MM), 160mV (line)

Signal to noise ratio: 65dB (MM), 75dB (line)

Channel separation: 50dB (line)

Output: 160mV (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 4 x IC, 3 x FET, 44 x transistors, 33 x diodes, 2 x thermisters

Dimensions: 16-1/2 x 5-1/2 x 12-1/4 inches

Weight: 28.5lbs


schematics   English - remlabs

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Kenwood. To purchase TK-140X spares or accessories, please contact the company via their website or visit an authorised retailer.