Solid State DC Integrated Amplifier (1979-81)
The Luxman L-11 is an innovative realtime processed DC integrated amplifier with contemporary, simple appearance offering a true 100W per channel, both channels driven into 8 ohms, with no more than 0.02% total harmonic distortion from 20Hz to 20 kHz.
Power output: 100 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 90kHz
Total harmonic distortion: 0.02%
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 92dB (MM), 100dB (line)
Output: 150mV (line), 1.6V (Pre out)
Dimensions: 438 x 395 x 125mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Feb 11th, 2015 by papo
Needed recap after 35 years and treble came back to the point that I got rid of technics equalizer I was using. Most caps had degraded and some were measuring almost no capacitance, also replaced bad output relays. Monitor switch was dirty and had muddy sound until sprayed and cleaned. Very nice sound, does not add or detract but makes you realize that some 1980's cd's were poorly produced.