hifi engine

Manual Library / Luxman

Luxman L-30

Solid State Integrated Amplifier

add a review (2 reviews)

Luxman L-30


Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 50kHz

Total harmonic distortion: 0.05%

Damping factor: 90

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 64dB (MM), 83dB (line)

Semiconductors: 27 x transistors, 8 x diodes, 2 x zener diodes, 1 x led

Dimensions: 440 x 160 x 225mm

Weight: 7kg


flyer   Deutsch -

service manual   English -

instruction/owners manual   English - challe

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Mar 27th, 2015 by Singlemania

Fantastic quality and finish. Valve like reproduction with a sweet phono stage and a very handy mono switch

Reviewed Mar 24th, 2014 by Zombie Master

I bought mine new 35 years ago and it has been in constant use. Just had it serviced for the first time. I wish everything I bought was this good.



L-30 fuses

fuses inside 3 of them,can't read what size are they, anyone?

L-30 fuses

I have an L-30 open in front of me. On the bottom - red wire -3.15amp. Two yellow wires - 5amp slow blo. This is on the 110vac unit.

L-30 fuses

F002 and F003 5A
F201 and F203 2,5A
F205 100mA


This website is not affiliated with or sponsored by Luxman. To purchase L-30 spares or accessories, please contact the company via their website or visit an authorised retailer.