Solid State Integrated DC Amplifier (1978-81)
The Luxman L-5 is a new, slim precision-look amplifier at modest cost featuring DC configuration in the output stage.
A mighty output is attained - 60W minimum continuous per channel, both channels driven into 8ohm loads, from 20Hz-20,000Hz with total harmonic distortion of no more than 0.2%
Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 100kHz
Total harmonic distortion: 0.03%
Damping factor: 80
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 92dB (MM), 100dB (line)
Channel separation: 60dB (MM), 78dB (line)
Dimensions: 438 x 289 x 105mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.