hifi engine

Manual Library / Luxman

Luxman R-5030

AM/FM Tuner Amplifier (1981-83)

add a review add a review

Luxman R-5030


Tuning range: FM, MW

Power output: 35 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.03%

Input sensitivity: 2.2mV (MM), 150mV (line)

Signal to noise ratio: 77dB (MM), 102dB (line)

Dimensions: 438 x 384 x 85mm

Weight: 7.7kg

Year: 1983


service manual   English -

Related Catalogues


Ultimate High Fidelity Stereo Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: R-5030

I have one of these which is oscillating in both L &R . (All inputs) . replaced all electros , STK3042 and one side all semiconductors. no change. Seems to be associated with the bal. control or the output lead dress. Put 100R in supply feeds to STK3042 with 100u bypasses (pins 7&9) lot better bus its still squegging. resoldered the whole board-just as bad .Must be something common to both amps ?

Any one else thrown one in the bin because of this ?

This website is not affiliated with or sponsored by Luxman. To purchase R-5030 spares or accessories, please contact the company via their website or visit an authorised retailer.