hifi engine

Manual Library / Marantz

Marantz 140

Stereo Power Amplifier (1976-77)

add a review add a review

Marantz 140


Power output: 75 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.2%

Damping factor: 30

Input sensitivity: 1.5V

Signal to noise ratio: 98dB

Speaker load impedance: 8Ω (minimum)

Dimensions: 119 x 353 x 269mm

Weight: 11kg


service manual   English - Jeepo65

Related Catalogues

Audio Components


High Fidelity

Stereo Components

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


page for 3200

I set up a 140 with 3200 Pre. with a couple of L-100 JBL speakers a while ago. Sounds quiet satisfactory even though the speakers where not both of the same age and the Pre. Had some work done. With these speakers you should be careful not to take the volume too high.

There should be a page for the 3200 Pre. and the accompanying receiver too.

I really loved this one because it is not too big and still sounds quiet good.

This website is not affiliated with or sponsored by Marantz. To purchase 140 spares or accessories, please contact the company via their website or visit an authorised retailer.