Monophonic Power amplifier
The model 2 power amplifier has been designed and constructed to give a long, trouble free life of fine listening quality.
Here is the type of performance and workmanship that previously was found only in high quality Broadcast or Laboratory equipment.
A built in metered test instrument permits simple, accurate adjustments for optimum performance.
Power output: 40W into 8Ω (mono)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Damping factor: 20
Input sensitivity: 0.7V
Signal to noise ratio: 90dB
Speaker load impedance: 4Ω to 16Ω
Valve complement: 1 x 12AX7, 1 x 6CG7, 2 x EL34, 2 x 6AU4GTA
Dimensions: 15 x 9.5 x 6.5 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.