hifi engine

Manual Library / Mitsubishi

Mitsubishi DA-P10

High Quality Stereo Pre-Amplifier

add a review add a review

Mitsubishi DA-P10


The Mitsubishi DA-P10 is a high-performance preamplifier, able to give first-class reproduction with any high quality power amplifier, but it is designed for use with the DA-Al5DC and DA-A1ODC amplifiers.

Not only do the electrical characteristics match perfectly, but the rack-type handles on the front of the power amplifiers have been designed to fit snugly into the rear of the DA-P10.

They are designed separately, for use together, so that you can choose the power (100 or 150 watts) and the features (DA-P10 or DA-P20) you want, and that fit your budget.

Even when docked, overall depth is only some 17", so that shelf space is saved. And there are thoughtful extras like the easy side-panel access to input and output jacks on the DA-P10, and the recessed channels to carry the connecting cables from pre-out to main-in racks.


Frequency response: 10Hz to 70kHz

Total harmonic distortion: 0.02%

Input sensitivity: 2.2mV (MM), 150mV (line)

Signal to noise ratio: 79dB (MM), 90dB (line)

Channel separation: 80dB (MM), 85dB (line)

Output: 150mV (line), 1V (Pre out), 9V (Pre out Max)

Dimensions: 425 x 170 x 204mm

Weight: 5.8kg


flyer   English -

service manual   English - AndrewOst

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Mitsubishi. To purchase DA-P10 spares or accessories, please contact the company via their website or visit an authorised retailer.