hifi engine

Manual Library / Monacor

Monacor REV-1

Reverberation Amplifier

add a review add a review

Monacor REV-1


This Transistorized Reverberation Unit has been specifically designed to add new depth and dimension to your electrical guitar or sound system and incorporates a built-in transistorized amplifier and reverberation unit.

Two controls are provided to control the amount of reverberation and volume.

Provisions have been made in the battery compartment to hold a spare battery besides the battery being used so that an extra battery is readily available when needed.

The cabinet is handsomely styled in rich oiled walnut with a silver brushed control panel and matching metal knobs.


Input: 6mV for 0.6V output

Input impedance: 5K ohms

Time delay: 20 to 30 milliseconds

Battery: 9V

Transistors: 2 x 2SB54, 2 x 2SB56

Dimensions: 2-11/16 x 7-1/8 x 4 inches

Weight: 1.5 lbs


instruction/owners manual   English - k7sparky

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Monacor. To purchase REV-1 spares or accessories, please contact the company via their website or visit an authorised retailer.