hifi engine

Manual Library / Movic

Movic Stereo A Two

Stereo Tape Deck

add a review add a review

Movic Stereo A Two


Skilful, old country craftsmanship and up to the minute engineering has been combined by Movic of Denmark to produce a recorder surpassing others costing far more.

Ruggedly constructed and extremely compact, the Movicorder is the culmination of years of experience in designing and manufacturing recording equipment for professional use.

Features include 3 motor drive, 2 separate channels, sound on sound and provision for installation of a synchronizing head.


Track system: 2/4-track, 2-channel, stereo/monaural system

Motor: 1 x capstan, 2 x spool

Tape speeds: 3 34  7 12 ips

Wow and flutter: 0.15% (7 12 ips)

Frequency response: 45Hz to 14kHz (7 12 ips)

Signal to Noise Ratio: 50dB

Total harmonic distortion: 3%

Input: 250mV (line), 2mV (mic)

Output power: 2 x 1.5 watts

Speakers: 2 x 8 ohm

Semiconductors: 2 x 2N77 transistors

Valve complement: 5 x ECC81, 1 x ECC88, 4 x ECC83, 2 x ECL82

Dimensions: 407 x 165mm

Weight: 21.8kg


brochure   Danish - Bent Seested

service info   Danish - Bent Seested

schematics   Danish - Bent Seested

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Movic. To purchase Stereo A Two spares or accessories, please contact the company via their website or visit an authorised retailer.