hifi engine

Manual Library / NAD

NAD 7240PE

Stereo Receiver (1988)

add a review (1 review)

NAD 7240PE


Tuning range: FM, MW

Power output: 40 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.03%

Damping factor: 50

Input sensitivity: 3.2mV (MM), 160mV (line)

Signal to noise ratio: 76dB (MM), 88dB (line)

Speaker load impedance: 2Ω to 8Ω

Dimensions: 420 x 108 x 380mm

Weight: 7.48kg


service manual   English -

instruction/owners manual   English - Maxtcc

flyer   English - Maxtcc

Related Catalogues

Product Highlights

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Oct 08th, 2014 by djbobby10

Super amp :)



re: 7240PE

I recently acquired one, and appreciate the info here very much!

re: 7240PE

Offset and no signal output of main amp:
check R441, 442 (47k miniature) and replace with larger size.

re: 7240PE

About 130 volts (corresponds to roughly 400 mwatts)
are dropped on these, so they will fail with time.

re: 7240PE

I have one of these so thank you for that information. Appreciated :)

This website is not affiliated with or sponsored by NAD. To purchase 7240PE spares or accessories, please contact the company via their website or visit an authorised retailer.