Audio / Video Receiver
Tuning range: FM, MW
Power output: 100 watts per channel into 8Ω (stereo)
Surround output: 100W (front), 50W (center), 30W (rear)
Frequency response: 10Hz to 70kHz
Total harmonic distortion: 0.1%
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 76dB (line)
Speaker load impedance: 4Ω to 16Ω
Video Connections: composite, SVHS
Dimensions: 432 x 135 x 375mm
Accessories: remote control
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Nakamichi AV Receivers
Submitted by larrywyoung
This receiver may not have HDMI ports, but the audio performance is excellent. I use it to power two Tannoy D500s, two Advent Legacys, and two Energy rear speakers... and the Energy front speaker. The AV-1 replaced my AV-2 as my primary home theater and gaming receiver.
Submitted by raghavan