Mobile Power Amplifier
The Nakamichi PA-300 is one of the most advanced components for true mobile high fidelity.
The amplifier can deliver a full 75 W + 75 W of output power, while keeping distortion to the negligible level of 0.003%. The power supply section employs a DC to DC converter to step up the voltage supplied by the car to ± 29 V.
Extremely stable operation is achieved by the digital switching power supply and high-performance ICs. Thanks to these features, the amplifier provides superbly clean and distortion-free sound even when driven to full power.
Continuous power output: 75 watts per channel into 4 ohms
Power bandwidth: 5 to 50,000 Hz
Total harmonic distortion: better than 115dB
Frequency response: 50 to 50,000Hz
Signal to noise ratio: better than 115dB
Damping factor: greater than 1000
Input sensitivity: 0.2 to 0.8V (adjustable)
Stereo separation: 85dB
Power source: 14.4V DC negative ground (10.8 to 15.6 V allowable)
Power consumption (maximum): 27A (both channels driven, 4 ohms, 75 W x 2)
Load impedance: above 4 ohms
Dimensions: 320 x 52 x 160mm
mkII instruction/owners manual - mastercp1h2v8q
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Feb 29th, 2016 by Bmwe-21
Great powerful amp. Super clean.