hifi engine

Manual Library / Nakamichi

Nakamichi RE-1

AM/FM Stereo Receiver

add a review add a review

Nakamichi RE-1


Tuning range: FM, MW

Power output: 80 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 0.1%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 78dB (MM), 100dB (line)

Output: 150mV (line), 1V (Pre out)

Speaker load impedance: 4Ω (minimum)

Dimensions: 430 x 100 x 370mm

Weight: 11.5kg

Accessories: RE-1 remote control


instruction/owners manual   English - benedmonton1

service manual   English - Ivy Caudieus

Related Catalogues

RE Series

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: RE-1

Had an RE-1 is storage, pulled it out plugged it in sounded great. Want to plug a sub into it. Anyone have any suggestions for this?

This website is not affiliated with or sponsored by Nakamichi. To purchase RE-1 spares or accessories, please contact the company via their website or visit an authorised retailer.