hifi engine

Manual Library / Nikko

Nikko Beta III

Stereo Preamplifier

add a review add a review

Nikko Beta III


Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.005%

Input sensitivity: 2mV (MM), 110mV (line)

Signal to noise ratio: 81dB (MM), 100dB (line)

Output: 100mV (line), 0.95V (Pre out)

Dimensions: 482 x 330 x 63.5mm

Weight: 5.9kg


service manual   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Siem Donders's picture

re: Beta III

I get one a few weeks ago, cleaned it and changed voltage internally from 220 to 240 volt.
I use it with also an old power amplifier from Marantz, its sounds perfect.
A very fine match.
Does anyone has the same experience?

This website is not affiliated with or sponsored by Nikko. To purchase Beta III spares or accessories, please contact the company via their website or visit an authorised retailer.