hifi engine

Manual Library / Nikko

Nikko NR-1019

AM/FM T-Locked Stereo Receiver (1979-80)

add a review add a review

Nikko NR-1019


Automatic T-locked FM fine tuning and big power output makes the NR-1019 an uncompromising addition to the top-of-the-line stereo system.

You would expect Nikko to exceed all other receivers in function and operation, but not perhaps to this extent.

Features include dual gate MOS FET front end in the FM tuner circuitry, phase locked loop in the stereo multiplex section, a regulated power supply, low noise phono preamp, DC power amp, and elaborate protection system.

Continuous power output is 70 watts per channel, minimum RMS, into 8 ohms, from 20 to 20kHz with total harmonic distortion at 0.03%.


Tuning range: FM, MW

Power output: 70 watts per channel into 8Ω (stereo)

Frequency response: 10Hz to 50kHz

Total harmonic distortion: 0.03%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 84dB (MM), 95dB (line)

Dimensions: 556 x 179 x 380mm

Weight: 15.5kg

Year: 1980


service manual   English - mrtv

schematic   English - mrtv

instruction/owners manual   English - schonewille94

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Nikko. To purchase NR-1019 spares or accessories, please contact the company via their website or visit an authorised retailer.