Solid State Stereo Receiver
Tuning range: FM, MW
Power output: 18 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.8%
Input sensitivity: 2.8mV (MM), 200mV (line)
Signal to noise ratio: 60dB (MM), 65dB (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x FET, 1 x IC, 34 x transistors, 19 x diodes
Dimensions: 390 x 127 x 340mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Sep 02nd, 2014 by Hteubert
Just cleaned up one of these and found it to have very nice sound. Lots of bass not quite enough treble control. But overall not bad for 1970