Integrated Stereo Amplifier
Power output: 75 watts per channel into 4Ω (stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.15%
Damping factor: 50
Input sensitivity: 2.5mV (mic), 2mV (MM), 180mV (line)
Signal to noise ratio: 72dB (MM), 95dB (line)
Output: 150mV (line), 30mV (DIN), 1.3V (Pre out)
Speaker load impedance: 4Ω (minimum)
Semiconductors: 4 x IC, 30 x transistors, 19 x diodes
Dimensions: 400 x 143 x 310mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Aug 21st, 2016 by ThirstyH
Still going in my loungeroom. A beautiful amp.