hifi engine

Manual Library / Onkyo

Onkyo TX-670

Solid State Stereo Receiver

add a review add a review

Onkyo TX-670


Tuning range: FM, MW

Power output: 56 watts per channel into 8Ω (stereo)

Frequency response: 14Hz to 30kHz

Total harmonic distortion: 0.3%

Damping factor: 50

Input sensitivity: 4mV (mic), 2.5mV (MM), 200mV (line)

Signal to noise ratio: 65dB (MM), 80dB (line)

Output: 200mV (line)

Speaker load impedance: 4Ω (minimum)

Semiconductors: 3 x FET, 57 x transistors, 43 x diodes, 2 x IC

Dimensions: 21-1/32 x 17-9/32 x 9-7/16 inches

Weight: 30.4lbs


service manual   English - Ivy Caudieus

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Onkyo. To purchase TX-670 spares or accessories, please contact the company via their website or visit an authorised retailer.