hifi engine

Manual Library / Peavey

Peavey 210

Powered Speaker Enclosure

add a review add a review

Peavey 210


The Peavey 210 Powered Enclosure is designed primarily to be used for bi-amp applications in conjunction with bass guitar amplification systems.

This product should not be used as a full range bass guitar amplifier. It can be used as a full range guitar power amp/speaker system or as a powered sound reinforcement monitor.

The speaker system consists of two 10 inch Scorpion loudspeakers. The power amplifier is rated at 210 watts into a 4 ohm load and contains DDT (Distortion Detection Technique) tp prevent the power amplifier from severe clipping (distortion).

The recommended crossover frequency is from 250 Hz to 500 Hz.


Type: 2 driver loudspeaker system

Crossover Frequency: 250Hz

Bass: 2 x 10"

Note: built in 210W amplifier


instruction/owners manual   English - Jeepo65

schematic   English - SEQURA

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Peavey. To purchase 210 spares or accessories, please contact the company via their website or visit an authorised retailer.