Stereo Integrated Amplifier (1993-94)
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 70kHz
Total harmonic distortion: 0.07%
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 84dB (MM), 103dB (line)
Output: 150mV (line)
Dimensions: 420 x 336 x 125mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Aug 01st, 2016 by Bertje
An year ago I have bought one from someone I found on the net. In the beginning one channel sometimes faltered. But after a while, with using the switches a lot, the amp continued to perform well. At first, it was used for music in a classroom , but the 30 W. turned out to be still too low. After moving into my study room, installed on a few reconditioned Philips 830 speakers , it functions satisfactorily .