Solid State Four Channel Amplifier (1972-74)
Power output: 27W/ch into 8Ω (stereo), 20W/ch into 8Ω (quadraphonic)
Frequency response: 15Hz to 50kHz
Total harmonic distortion: 0.5%
Damping factor: 40
Input sensitivity: 2.5mV (MM), 200mV (line)
Signal to noise ratio: 80dB (MM), 90dB (line)
Output: 200mV (line), 0.5V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x FET, 65 x transistors, 15 x diodes
Dimensions: 430 x 138 x 337mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.