Loudspeaker System (1982-84)
It's not enough to describe Pioneer's newest line of speakers as fine technological achievements.
For every one of our speakers is also the result of hundreds of hours of listening comparison tests by Pioneer engineers and trained musicians. When their endorsements agreed with our computer and laser holograph tests, we knew that our technology was superior.
The S-510 is one of the new speaker systems that benefited from our advanced design and testing procedures.
We discovered that our Polymer Graphite cone material does sound better. Our tests told us that it has better transient response, better damping characteristics and holds up better to high input levels. Our ears agreed.
So we've used it in both the 25cm woofer of the S-510 and the 4.5cm midrange.
An aluminium ribbon tweeter handles all high frequencies up to an amazing 50,000Hz, your assurance that response will be accurate within the audible range.
So that high input levels of new digital sources may be handled, the ribbon has superb transient response and is attached at the ends rather than along the edges.
The moving mass is reduced by making the diaphragm itself act as the voice coil.
A high level control and a removable grille round out the S-510.
Type: 3 way, 3 driver loudspeaker system
Frequency Response: 35Hz to 50kHz
Power Handling: 80W
Crossover Frequency: 2000, 13000Hz
Bass: 1 x 250mm cone
Midrange: 1 x 45mm cone
Tweeter: 1 x ribbon
Enclosure: bass reflex
Dimensions: 325 x 570 x 313mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.