hifi engine

Manual Library / Pioneer

Pioneer SA-6300

Stereo Integrated Amplifier (1976-1977)

add a review add a review

Pioneer SA-6300

Description

The Pioneer SA-6300 is a 20 watt integrated amplifier with a very good cost/watt/distortion ratio.

Features include a tape monitor, loudness switch and 2 pairs of speakers.

Specifications

Power output: 20 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.08%

Input sensitivity: 2.5mV (MM), 150mV (line)

Signal to noise ratio: 70dB (MM), 85dB (line)

Dimensions: 350 x 125 x 282mm

Weight: 6.9kg

Year: 1976

Downloads

schematic  English

instruction/owners manual  English - ionroata

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Comments

rafael_t's picture

Repair this Model

Hi folks !
Be careful when repair this particular model !
He have one Protection Circuit with an Triac (D101) who burns lots of Fuses (FU1 to FU5) if you don't have the necessary careful, so when repair or adjust it, first just disactivate him (Disconnect the pins 3 +5 of his module) !
After repair the unity, don't forget to activate the protection again !
I hope this helps !
Rafael from Lisbon, Portugal

re: Repair this Model

hi.i am looking for a fit amp for my AR3a.guide me .thanks

andon_viorel's picture

PIONEER SA6300

Thank you so much!

This website is not affiliated with or sponsored by Pioneer. To purchase SA-6300 spares or accessories, please contact the company via their website or visit an authorised retailer.