Solid State Stereo Amplifier (1970)
Power output: 27 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 40kHz
Total harmonic distortion: 0.5%
Input sensitivity: 0.12mV (MC), 3mV (MM), 200mV (line)
Signal to noise ratio: 85dB (MM), 100dB (line)
Output: 3V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x FET, 26 x transistors, 5 x diodes
Dimensions: 370 x 118 x 314mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Mar 24th, 2014 by bwcarter
Nice piece of vintage gear....1973 to 75 I think...and shows the slightly different and possibly superior build quality as compared to few years newer stuff..mine has good quality sound, considering it's age and price point.. Pleasant to use and look at. Quite full featured with both MC and MM phono inputs. Compact size which is handy at times. Worth about $150, plus or minus $50 - in 2014. Decent unit for this price range.