Stereo Integrated Amplifier (1975-78)
The Pioneer SA-7500 is a 2-channel integrated stereo amplifier with inputs for two turntables, a tuner, auxiliary source and two tape loops.
Power output: 40 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 50kHz
Total harmonic distortion: 0.3%
Damping factor: 25
Input sensitivity: 7.5mV (mic), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line)
Output: 150mV (line), 30mV (DIN), 1V (Pre out)
Semiconductors: 2 x FET, 35 x transistors, 21 x diodes
Dimensions: 420 x 150 x 345mm
Accessories: connecting cord
Power output: 45 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.1%
Damping factor: 30
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 73dB (MM), 95dB (line)
Output: 150mV (line)
Semiconductors: 2 x IC, 26 x transistors, 17 x diodes
Dimensions: 380 x 139 x 308mm
Accessories: connecting cord, hex wrench
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jun 05th, 2016 by dsalomone
Possiedo un 7500 prima serie. Qualità costruttiva ai massimi livelli in ogni particolare: 2 ingressi Phono, separazione pre-finale. Ottimo suono.
Reviewed Oct 10th, 2014 by ko3epor
strong, punchy sound despite low watts rating