Solid State Stereo Amplifier (1970-71)
The Pioneer SA-900 has high performance pre-amplifiers and power amplifier stages for large output, an extremely high signal to noise ratio and an accurate equaliser characteristic.
Power output: 50 watts per channel into 8Ω (stereo)
Frequency response: 25Hz to 40kHz
Total harmonic distortion: 0.3%
Damping factor: 50
Input sensitivity: 1.9mV (mic), 0.155mV (MC), 3.1mV (MM), 7.1mV (ceramic), 180mV (line)
Signal to noise ratio: 80dB (MM), 95dB (line)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 2 x FET, 29 x transistors, 7 x diodes
Dimensions: 405 x 140 x 339mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.