Stereo Integrated Amplifier (1986)
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 70kHz
Total harmonic distortion: 0.08%
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 81dB (MM), 102dB (line)
Output: 150mV (line)
Speaker load impedance: 6Ω to 16Ω
Dimensions: 420 x 98 x 273mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Feb 06th, 2015 by max.steel
The pioneer SA-970 is a beast of a stereo. I found one once on the side of the road when I was about 13. 6 years later I still have it and use it very often.
This site says the stereo is 70w each channel but it seems like it has a lot more power. I am currently using 4 200w dj speakers with the system and I turn it up to 6 or 7 and the speakers cant handle it. I use the stereo for house parties and general use because its insanity loud.