hifi engine

Manual Library / Pioneer

Pioneer SM-G205

AM/FM Stereo Receiver

add a review add a review

Pioneer SM-G205


The Pioneer SM-G205 provides two channels of 16 watts of distortion free power per channel using two pairs of ECL-86 tubes in push pull circuits.

Output impedances of the phase inverter circuits in the power output stages are carefully balanced for stable, low distortion operation.

Features include a built in FM multiplex circuit with extremely low noise stereophonic reception, with high channel separation.


Tuning range: FM, MW

Power output: 16 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Input sensitivity: 2.5mV (MM), 165mV (line)

Signal to noise ratio: 50dB (MM), 70dB (line)

Speaker load impedance: 8Ω to 16Ω

Valve complement: 19 x tubes, 7 x diodes

Dimensions: 18.5 x 13.25 x 5.5 inches

Weight: 29lbs


schematic   English - danickd

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Pioneer. To purchase SM-G205 spares or accessories, please contact the company via their website or visit an authorised retailer.