hifi engine

Manual Library / Pioneer

Pioneer SX-300

AM/FM Stereo Receiver (1974)

Pioneer SX-300

Description

The SX-300 is Pioneer's quality FM/MW stereo receiver for introduction to the world of stereo listening pleasure.

The unit features an FM linear dial scale and large tuning meter, FET equipped FM front end and 3-gang variable capacitor for better FM reception under all conditions. Precise RIAA equalisation is within 1dB

It can handle all your stereo needs, a turntable, tape deck, auxiliary units such as cartridge players etc.

Specifications

Tuning range: FM, MW

Power output: 7 watts per channel into 8Ω (stereo)

Frequency response: 30Hz to 20kHz

Total harmonic distortion: 1%

Damping factor: 20

Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 70dB (MM), 80dB (DIN), 80dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 1 x FET, 31 x transistors, 23 diodes

Dimensions: 441 x 132 x 324mm

Weight: 6kg

Accessories: FM T-type antenna

Downloads

instruction/owners manual (de)

instruction/owners manual (en)

service manual (en) - sbirov

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Pioneer Receivers

Comments

This website is not affiliated with or sponsored by Pioneer. To purchase a SX-300 please contact the company via their website or visit an authorised retailer.