AM/FM Stereo Receiver
Pioneer's Model SX-6000 puts together in one attractive package everything the Hi-Fi enthusiast would ever ask of a stereo receiver: power, FM sensitivity and selectivity, the versatility to handle multiple speaker systems or tape units, and advanced circuitry for low-noise music output and long-life stability and performance.
The basic performance specifications speak highly for themselves - and go a long way to show why this receiver is one of the finest ever made for its price.
You get peak music power output of 200 watts at 4 ohms (IHF), or 54 watts of continuous power per channel driven at 8 ohms.
You'll pull in even far-off fringe FM stations with the FET front-end and FM sensitivity that is rated at an exceptional 1.8 uV.
And you'll be able to handle up to three different speaker systems, a pair of tape decks, even two different turntables with this highly-advanced Pioneer unit.
No matter how you like your stereo, no matter how much you want from a receiver, the SX-6000 is going to make all the difference in the world for good music listening. Just listen.
Tuning range: FM, MW
Power output: 36 watts per channel into 8Ω (stereo)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 1%
Damping factor: 65
Input sensitivity: 4mV (mic), 2.4mV (MM), 210mV (DIN), 210mV (line)
Signal to noise ratio: 80dB (MM), 90dB (line)
Output: 210mV (line), 37mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 5 x IC, 40 x transistors, 17 x diodes
Dimensions: 470 x 172 x 340mm
Accessories: FM T-type antenna
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.