Audio/Video Stereo Receiver (1998-99)
Tuning range: FW, MW
Power output: 100 watts per channel into 8Ω (stereo)
Surround output: 100W (front), 100W (center), 100W (rear)
Frequency response: 5Hz to 100kHz
Input sensitivity: 2.8mV (MM), 200mV (line)
Signal to noise ratio: 75dB (MM), 80dB (line)
Output: 200mV (line)
Speaker load impedance: 8Ω to 16Ω
Video Connections: composite
Dimensions: 420 x 160 x 374mm
Accessories: remote control
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jun 16th, 2014 by Guilherme Dortas
I've had this receiver for a few years, and it still sounds great. Using with LD, DVD, and OTA HDTV and all work great in Dolby Digital. It would be nice if it had DTS but it's so old that DTS wasn't available when it was made! Sounds great, highly recommended if you find one used.