hifi engine

Manual Library / Quad

Quad AM2

LW, MW, and SW tuner

add a review (1 review)

Quad AM2


The AM2 was designed to compliment the Control 22 and FM1 units.


Type: Mono Tuner

Tuning Bands: MW, LW, SW

Tuning Scale: Analogue

MW Tuning Range: 510 to 1620 kHz

LW Tuning Range: 145 to 375 kHz

SW Tuning Range: 5.8 to 18.5 MHz

Output: 100mV

Valve complement: EF89, ECH81, EBF89, EM84

Dimensions: 10.5 x 3.5 x 6 inches

Weight: 6lbs

Finish: silvered fawn


brochure   English -

schematic   English -

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


 Login or register to post reviews

Reviewed Sep 28th, 2013 by dominiquemichel

It can not be compared with a high-end Hallicrafters from the same period, but with a good outdoor antenna, even the one band short wave band is doing a pretty good job. On the LW, I was able from MalmචSweden, to receive France Inter, which is at the very limit of the wave propagation on that frenquency. I didn't used it much on the MW, but it look like to do a pretty good job too.

Most of all, combined with the tone controll of the Quad 22, the sound is surprisingly good in almost any condition. So, for an AM tuner of that technology, I put it a 10 on 10.



This website is not affiliated with or sponsored by Quad. To purchase AM2 spares or accessories, please contact the company via their website or visit an authorised retailer.