hifi engine

Manual Library / Realistic

Realistic Mach One

Liquid Cooled Speaker System

add a review add a review

Realistic Mach One


Type: 3 way, 3 driver loudspeaker system

Frequency Response: 25Hz to 20kHz

Power Handling: 160W

Crossover Frequency: 1200, 4500Hz

Impedance: 8Ω

Bass: 1 x 380mm

Midrange: 1 x ferrofluid cooled horn

Tweeter: 1 x extended range ferrofluid cooled horn

Enclosure: sealed

Finish: oiled walnut veneer

Dimensions: 727 x 440 x 300mm

Weight: 29.5kg


instruction/owners manual   English - rnbenson39

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


weatherwonder74's picture

re: Mach One

I am in search of the 4024-A owners manual

re: Mach One

It was a 1 page insert included with each speaker.
Not worth having really. It showed the frequency curve versus the settings on the knobs and that was about it. Might run across it in the future, looking through old literature and will post.
What I did not like about my 2 Mach One pairs I bought were the highs were too harsh for long listening hrs. Now I insist on round domed tweeters and Mids if I can find them like in the AR3a.

weatherwonder74's picture

re: Mach One

Audio karma has mods for the 4024,4024-a and
The 4029 I did them to my 4024's and wow blew
Me away! Deep tight low end mid's and highs are
Much less harsh they sound like klipch forte
Amazing sound. I never would of guessed they
Could sound that good. I'm using my AKAI am-2850
And they drain it and ask for more, but I also find
Their very precise at low volume as well
Thank you for responding have a good one.0

This website is not affiliated with or sponsored by Realistic. To purchase Mach One spares or accessories, please contact the company via their website or visit an authorised retailer.