hifi engine

Manual Library / Rotel

Rotel RA-310

Solid State Stereo Integrated Amplifier

add a review add a review

Rotel RA-310


Power output: 15 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 30kHz

Total harmonic distortion: 0.2%

Damping factor: 30

Input sensitivity: 3mV (MM), 200mV (line)

Signal to noise ratio: 60dB (MM), 65dB (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 1973

Dimensions: 14 x 4.5 x 7.5 inches

Weight: 11lbs


instruction/owners manual   English - Jeepo65

service manual   English - Jeepo65

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: RA-310

Is it possible to use a Rotel RA 210 amplifier as a pre amplifier linked to a valve main amplifier?

re: RA-310

No, you need an amp with connectors marked 'pre-out'.


This website is not affiliated with or sponsored by Rotel. To purchase RA-310 spares or accessories, please contact the company via their website or visit an authorised retailer.