hifi engine

Manual Library / Sansui

Sansui 220

Stereo Tuner Amplifier (1969)

add a review add a review

Sansui 220


Similar to the Sansui Model 250 in size, looks and performance characteristics, this model features an additional radio band in place of a multiplex circuit.

It is ideal for places where stereo broadcasting facilities are not available.

In addition to regular AM and FM bands, the 220 offers worldwide radio pick-up capabilities with a shortwave band frequency range from 3.5 to 10 MHz.

Compact with 12 tubes, two transistors and six diodes, special FM AFC control for stable FM reception, tape monitor, mode, loudness and noise filter controls.

The 220 has also been provided with a multiplex terminal for fast and convenient connection with a multiplex adaptor if desired.


Tuning range: FM, MW, SW

Power output: 10 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 20kHz

Total harmonic distortion: 1%

Input sensitivity: 3mV (MM), 150mV (line)

Signal to noise ratio: 65dB (MM), 70dB (line)

Output: 660mV (line)

Speaker load impedance: 8Ω to 16Ω

Dimensions: 5-5/32 x 17-3/8 x 12-19/32 inches

Weight: 27.1lbs

Finish: silver

Year: 1969


schematic (low res)  English - Ivy Caudieus

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sansui. To purchase 220 spares or accessories, please contact the company via their website or visit an authorised retailer.