hifi engine

Manual Library / Sansui

Sansui AU-117

Stereo Integrated Amplifier (1978)

add a review add a review

Sansui AU-117


Even this moderately priced amplifier shows that Sansui do not sacrifice performance quality for power.


  • Power output: 15 watts per channel into 8Ω (stereo)

    Frequency response: 10Hz to 40kHz

    Total harmonic distortion: 0.17%

    Damping factor: 50

    Input sensitivity: 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 76dB (MM), 94dB (line)

    Channel separation: 65dB (MM), 68dB (line)

    Output: 150mV (line)

    Speaker load impedance: 8Ω (minimum)

    Semiconductors: 25 x transistors, 7 x diodes, 1 x zener diode, 1 x LED

    Dimensions: 430 x 110 x 340mm

    Weight: 6.4kg

    Year: 1978

  • Power output: 25 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.17%

    Dimensions: 482 x 110 x 347mm

    Weight: 6.7kg

    Year: 1980


mkII schematic  English - mozwell

schematic  English - Ivy Caudieus

brochure  English - Ivy Caudieus

mkII service manual  English - Ivy Caudieus

schematic (imp scan)  English - adico12

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sansui. To purchase AU-117 spares or accessories, please contact the company via their website or visit an authorised retailer.