hifi engine

Manual Library / Sansui

Sansui AU-317

DC Powered Integrated Amplifier (1977-80)

add a review add a review

Sansui AU-317


  • Power output: 50 watts per channel into 8Ω (stereo)

    Frequency response: 5Hz to 70kHz

    Total harmonic distortion: 0.03%

    Damping factor: 70

    Input sensitivity: 20mV (mic), 2.5mV (MM), 150mV (line)

    Signal to noise ratio: 77dB (MM), 100dB (line)

    Channel separation: 65dB (MM), 73dB (line)

    Output: 150mV (line), 1V (Pre out)

    Speaker load impedance: 8Ω (minimum)

    Semiconductors: 51 x transistors, 25 x diodes, 2 x FET

    Dimensions: 430 x 110 x 340mm

    Weight: 9.5kg

    Year: 1978

  • Power output: 60 watts per channel into 8Ω (stereo)

    Frequency response: 20Hz to 20kHz

    Total harmonic distortion: 0.03%

    Dimensions: 482 x 110 x 347mm

    Weight: 9.8kg

    Year: 1980


service manual   English - Ivy Caudieus

brochure   English - Ivy Caudieus

instruction/owners manual   English - MontanaAndy

II service manual   English - Ivy Caudieus

Related Catalogues


Audiophile Guide

HiFi Guide

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


This website is not affiliated with or sponsored by Sansui. To purchase AU-317/AU-317 mkII spares or accessories, please contact the company via their website or visit an authorised retailer.