Integrated Stereo Amplifier (1976-77)
The Sansui AU-4900 is an integrated stereo amplifier giving 38 watts per channel minimum into 8 ohms at 1000Hz with no more than 0.15% total harmonic distortion.
Plus-minus symmetrical power supply.
Adequate power to reproduce the full dynamic range.
Direct-coupled, low-noise transistors in extremely accurate phono equaliser circuitry.
Elaborate protection through an electronic relay, instead of fuses.
High and low filter, audio muting and Mic mixing facility.
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 40kHz
Total harmonic distortion: 0.15%
Damping factor: 50
Signal to noise ratio: 90dB (line)
Channel separation: 60dB (MM)
Dimensions: 400 x 120 x 240mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jun 15th, 2016 by Rx7man
Good unit.. Picked mine up for free, cleaned it and set the DC bias.. it works perfectly after 40 years and sounds great