Solid State Stereophonic Amplifier (1970)
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 70kHz
Total harmonic distortion: 0.5%
Damping factor: 15
Input sensitivity: 3.5mV (mic), 2mV (MM), 140mV (DIN), 140mV (line)
Signal to noise ratio: 85dB (mic), 80dB (MM), 85dB (line)
Channel separation: 50dB (line)
Output: 150mV (line), 30mV (DIN)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 17-1/8 x 6-1/8 x 13-1/8 inches
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.