hifi engine

Manual Library / Sansui

Sansui AU-8500

Stereo Amplifier

Sansui AU-8500

Specifications

Power output: 60 watts per channel into 8Ω (stereo)

Frequency response: 15Hz to 30kHz

Total harmonic distortion: 0.1%

Damping factor: 50

Input sensitivity: 2.5mV (mic), 2.5mV (MM), 100mV (DIN), 100mV (line)

Signal to noise ratio: 65dB (mic), 75dB (MM), 85dB (line)

Output: 100mV (line), 30mV (DIN), 0.8V (Pre out)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 58 x transistors, 2 x FET, 33 x diodes, 5 x zener diodes

Dimensions: 140 x 500 x 347mm

Weight: 20.5kg

Downloads

service manual (en)

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.

Sansui amplifiers

Comments

This website is not affiliated with or sponsored by Sansui. To purchase a AU-8500 please contact the company via their website or visit an authorised retailer.