Integrated Stereo Amplifier (1981-83)
Power output: 95 watts per channel into 8Ω (stereo)
Frequency response: 10Hz to 20kHz
Total harmonic distortion: 0.005%
Damping factor: 150
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 250mV (line)
Signal to noise ratio: 74dB (MC), 90dB (MM), 110dB (line)
Channel separation: 80dB (MM), 50dB (MC), 80dB (line)
Output: 250mV (line)
Speaker load impedance: 8Ω (minimum)
Dimensions: 445 x 163 x 403mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Submitted by r.engels
Highly recommended Amplifier, Well build with a super sound that even in these days still can compete with expensive amps. beautiful design and a stable power to drive the most difficult speakers...
Submitted by nissanser91a
Well I have two AU-D9s and when aligned properly they are some of the cleanest sound you'll ever hear. I biamp with them one amp per side to drive the bass w/ up to 95 watts and up to 95 more for the mids and highs. Oh, I drive Yamaha NS-1000Ms