Audio Mixing Amplifier (1977-80)
The AX-7 is a moderately priced audio mixing amplifier for recording or direct amplification.
Inputs include 4 microphones, 2 electric guitars and phono (source from your own amplifier or receiver) plus 3 tape monitor circuits and built in reverberator for unlimited effects.
Rack mounting devices are included.
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.1%
Input sensitivity: 1mV (mic), 150mV (line)
Signal to noise ratio: 57dB (mic), 64dB (line)
Output: 1000mV (line), 1V (Pre out), 5V (Pre out Max)
Dimensions: 482 x 110 x 299mm
If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.
If you have additional documentation please consider donating a copy to our free archive.
Reviewed Jun 15th, 2016 by Rx7man
It's a handy and decent unit, with lots of input/output options.. Reverb isn't solid state, and is sensitive to mechanical shock (you tap the unit and you hear the reverb rattle).
I've had mine for a decade or so, and it's got some scratchy knobs I have to get to fixing, otherwise it's been reliable
Reviewed Feb 18th, 2016 by Kainerz