hifi engine

Manual Library / Sansui

Sansui G-5000

Pure Power DC Stereo Receiver (1978-79)

add a review add a review

Sansui G-5000


The Sansui G-5000 is a powerful AM/FM receiver with DC power amplifier section


Tuning range: FM, MW

Power output: 45 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 50kHz

Total harmonic distortion: 0.03%

Damping factor: 30

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 78dB (MM), 95dB (line)

Channel separation: 55dB (MM), 65dB (line)

Output: 150mV (line), 43mV (DIN)

Speaker load impedance: 8Ω (minimum)

Dimensions: 464 x 181 x 408mm

Weight: 14kg


service manual   English -

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: G-5000

Any info on changing my lights to LED on the G 5000 ?
Or replacement tips with original bulbs ?

re: G-5000

Manual says light is 8v, .3a. LEDs typically want 3V, so if you put 3 in series, and added a resistor to limit the current through the LEDs, electrically it should do the trick.

BUT I think the illumination might look odd. Manual says it's PN 0400560, and you can find various offerings on Ebay. One interesting one was to use a cheap screw-in E10 base bulb...

Good luck. It's worth it as lit up it is a glorious piece of work.

This website is not affiliated with or sponsored by Sansui. To purchase G-5000 spares or accessories, please contact the company via their website or visit an authorised retailer.