hifi engine

Manual Library / Sansui

Sansui G-5700

Pure Power DC Stereo Receiver

add a review add a review

Sansui G-5700

Specifications

Tuning range: FM, MW

Power output: 75 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 75kHz

Total harmonic distortion: 0.03%

Damping factor: 50

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (line)

Signal to noise ratio: 78dB (MM), 95dB (line)

Channel separation: 55dB (MM), 65dB (line)

Output: 150mV (line)

Speaker load impedance: 8Ω (minimum)

Dimensions: 465 x 177 x 405mm

Weight: 13.8kg

Downloads

service manual  English

If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


Comments

FM not working

hello. i have a problem with the fm tuner. the dial works and knob spins, but the digital readout does not change from 135.3 and no stations come in.

zappa_yo's picture

re: FM not working

Hello Script56. Same situation happened to me, but digital readout is fixed at 144.3 Mhz. No sound al all, not even static or noise. AM works perfectly.
Could you solve this issue? Any comment would be appreciated. Thanks in advance.

Does the receiver work on AM

Hello
Does the receiver still function on AM?

This website is not affiliated with or sponsored by Sansui. To purchase G-5700 spares or accessories, please contact the company via their website or visit an authorised retailer.