hifi engine

Manual Library / Sansui

Sansui G-6000

Pure Power DC Stereo Receiver (1978-79)

add a review add a review

Sansui G-6000


Tuning range: FM, MW

Power output: 65 watts per channel into 8Ω (stereo)

Frequency response: 5Hz to 50kHz

Total harmonic distortion: 0.03%

Damping factor: 30

Input sensitivity: 6mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 78dB (MM), 95dB (line)

Channel separation: 60dB (MM), 65dB (line)

Output: 150mV (line), 43mV (DIN)

Speaker load impedance: 8Ω (minimum)

Dimensions: 505 x 187 x 409mm

Weight: 17.5kg


service manual  English

brochure  English

schematics  English

Related Catalogues


If you have any problems opening files please read the download FAQ. All files are provided under strict licence and reproduction without prior permission or for financial gain is strictly prohibited.

If you have additional documentation please consider donating a copy to our free archive.


re: G-6000

I purchased this in Okinawa in 1978 New. Over the intervening years I have brought this into service and then stored it a number of times replacing this old heavy unit with newer lighter ones. Well, yes they were lighter but when they broke I broke out my old standby. I finally wised up and only run the G-6000. Marines are hardheaded but it is hard to believe that it took over 30 years to figure this out.

This website is not affiliated with or sponsored by Sansui. To purchase G-6000 spares or accessories, please contact the company via their website or visit an authorised retailer.